1. SmartShrink Shrinkage Rate Tester

---

SmartShrink Shrinkage Rate Tester determines multiple shrinkage rate  test results in 5 seconds for fabrics after  washing, steaming, and  dry-cleaning.

SmartShrink takes a picture of a fabric  sample by using a camera equipped on the top, automatically measuring the distances between the marked dots, and  calculates the test results by the patented vision inspection algorithm of ChiuVention.  The test results will be real-time shared with the IoT- connected SmarTexLab  app  installed on the computer and  smartphone.

SmartShrink automatically measures fabric  shrinkage and  calculates the test results, avoiding manual errors and  making the test more  accurate and  reliable; It automatically saves the test data and sample photos, and  can share and  send the test results in real-time, making the test more transparent and  trustworthy; The whole  process of the test has  been reduced from 6 minutes to only

5 seconds, making the test more  rapid  and  reducing the cost  by more  than  90%.

• The test results are more  accurate and  reliable.

By using SmartShrink, the test sample is photographed with a high-definition camera, and  the distances between the marked dots are automatically measured, then shrinkage rate  is calculated with a unique algorithm, yielding all test results in real-time accurately.

• Save $30,000/year for textile  testing labs.

In the conventional process, for each sample to be tested for shrinkage, it totally takes 6 minutes to finish  the work: measuring and  recording before/after washing, calculating, typing the data into the computer, printing the

report, etc.,  while SmartShrink can do all the work above in just 5 seconds.

• Output  multiple data at one time,  reflecting the quality of fabric  more  comprehensively and  objectively.

Warp and  weft shrinkage, seam twist  rate, vertical  twist rate, and  diagonal twist  rate  can be output at one time, including credibility  rating for the test results. It can evaluate the quality of the fabric  more  comprehensively.

• Famous brands are using SmartShrink.

International brands and  authoritative testing institutions such as Anta, Adidas,Texwinca and  ITS have  widely used SmartShrink.

• Can be connected to ERP or LIMS system.

The test results can be directly  uploaded to the factory's ERP or laboratory LIMS system. SmartShrink can help you manage shrinkage test data conveniently and  efficiently.

Smartindale Martindale Abrasion and  Pilling Tester is used for fabric  abrasion and  pilling tests. It generates a Lissajous curve with a digital algorithm, and  then  drives  the friction,  achieving accurate running without calibration. You can switch test modes such as the abrasion test to the pilling test with one click without changing the pins.

You can also  control and  monitor the Smartindale from your smartphone by SmarTexLab  app  connection, and  the test data can be uploaded to ERP or LIMS system, to realize  smart testing.

It can test the abrasion and  pilling resistance of cotton, linen, silk woven  fabrics and  other textiles, film materials, knitted fabrics, woolen fabrics, artificial leather, synthetic leather, gloves, labor protection materials, and  so on. It is widely applicable to more than  20 international standards such as ISO 12945-2-2020, ISO 12947-2-2016, BS EN 530-2010; ASTM D4970/4970M-22, etc.

• The Lissajous curve  is calibration-free, making it a more reliable test.

Smartindale runs  by an exclusive and  patented digital algorithm that  drives  dual servo  motors and  precision slide rails, replacing the traditional mechanical analog drive to generate a perfect Lissajous curve.  After more  than  10 million times (equal to three years non-stop) of ultra-high intensity friction  life test with rubber simulation specimen and  double weight, the Lissajous curve  is still accurate and perfect, so the test is more  reliable.

• Can be connected to ERP or LIMS through an APP, more smart

 Smartindale can be connected to the APP SmarTexLab installed on your smartphone, then    you can set    the parameters, monitor the test status, etc.  After thecompletion of the test, the sample information, the test process, and  the results can be uploaded to ERP or LIMS, to achieve smart testing, more  in line with the requirements of CNAS or ILAC, so that  the entire testing process is more convenient, transparent, and  efficient.

• One-touch switching between abrasion and  pilling testing, for greater efficiency.

You can switch the test modes (e.g. abrasion to pilling) on the control panel, no need to remove the cover plate and change the pin position.

• User-friendly design

The flip-up  guide plate can be lifted with one hand, which is convenient for loading samples and  taking samples; there is a cushioning function when  the cover plate falls, which avoids  damaging the machine and  is safer for the operators.

• Can be connected to ERP or LIMS system.

The test results can be directly  uploaded to the factory's ERP or laboratory LIMS system. SmartShrink can help you manage shrinkage test data conveniently and  efficiently.

• Smart instrument

Can be connected through Wi-Fi with SmarTexLab App installed in the smart phones, set parameters, monitor the test status, receive equipment warning reminders, replenishment reminders, etc., and share test results with one click.

• Smooth operation, precise and durable

The hydraulic system adopts full servo control and precise screw drive, providing smooth operation, precise and durable transmission, and low noise.

• High-precision testing

The pressure measurement part is equipped with a high- precision pressure sensor, with accuracy up to 0.2, which means the deviation is 0.2% of the maximum range.

• Longer service life of sensors

HydroBurst is equipped with the Panasonic laser dis- placement sensors which have no rod and are easy to replace testing cups, thus providing sensors with better protection and reducing the risk of damage compared to traditional rod-type sensors.

• Smart identification system for testing cups

When changing the testing cup, the system can automati- cally identify the current testing cup model and switch the testing parameters automatically, which also greatly improves work efficiency.

The WashTrue Washing Color Fastness Tester adopts smart temperature control algorithm to ensure that the washing color fastness test meets the test standards and the results are reliable. It is applicable to standards such as ISO 105 C06:2010, AATCC61-2013e3, GB/T 12490-2014, M&S C4A,

AATCC190-2010e2 (2016) e2, NEXT TM 02, etc.

A series of testing operations can be completed on the touch screen, such as selecting standards, parameters, time, and temperature settings, adding water, draining water, etc., it is smart and efficient, and the buzzer alarms automatically when the test is completed. The WashTrue also has multiple safety designs, and can run long time with low noise.

• Smart, Easy to use and Efficient

The smart screen interface allows direct access to a variety of operations: selection of test standards, customization oftest parameters, temperature calibration, selection of temperature increase rate, setting of time, heatingtemperature, etc.

• Precise temperature control, more reliable testing

Smart temperature control algorithm achieves accurate and effective test water temperature control.

• Humanized design, durable

Multiple safety protection design, the test rotating frame is equipped with an anti-jamming function to protect the instrument. The heating is achieved by solid state relay controlled electric, bringing more stable temperature and longer serviclife. The water tank is made of SUS304 material, also durable.

SmartPull Tensile Tester is AC servo-driven and equipped with ball screws to provide stable pulling force and achieve higher testing accuracy. The software of the tester is compatible and powerful by outputting

comprehensive test indexes, such as displacement, maximum force, elongation, stress, etc.; and there are various safety designs to protect the instrument and the operator's safety. It is a tensile machine specially built for textiles, leather, footwear, etc. It can do tension, compression, bending, tearing, shearing, peeling and top breaking tests. It is applicable to many international standards, such as ISO 90733, ISO13934-1/2 , ASTM D5034, ASTM D5035, ISO 3377-2, ISO 13937-3 ,FZ/T 01030,GB/T 19976 and so on.

• Higher testing accuracy

AC servo drive and ball screw achieve stable and constant pulling force, with force accuracy within 1%, ensuring the reliability and repeatability of test results.

• Safety guarantee for the whole testing process

Equipped with an intelligent and active displacement and  torque alarm system, overload and emergency stop device, and up and down travel limiting device, SmartPull always keeps the testing process safe and stable.

• Powerful software

The test software can be applied to different languages and  can present the displacement, maximum force, elongation, stress, maximum stress, bending stress, speed, and other test results. That is, getting more comprehensive test indexes.

• Applicable up to a series of standards

Such as ISO 3377-2, ISO 13934-1/2, ISO 13937-2/3, ISO 20932-1, ASTM D5034, ASTM D5035, ASTM D5587,GB/T3917.2, FZ/T 01030, ISO 9073-4, ISO13934-1/2, ISO 9073-3, ISO 13937-2/3, ISO 4674-1, GB/T 3917.4, GB/T3923.1, ISO 2062, ASTM D6797, GB/T 19976. 

• Easy operation

Multi-functional pneumatic gripper, just replace the clips to complete different tests, easy and quick to replace. Tensiletests and top breaking tests do not need to replace the sensor.

• Unique design

SmartPull Tensile Tester has a unique appearance design combined with a sense of technology, scratch-resistant surface, and it is durable. User-friendly Side cutting design, more user-friendly.

The Specification of SmartPull

• Testing capacity : 250kg,( 500kg is optional and the  appearance will change)
• Test level : class1
• Max Travel : 800mm (without fixture)
• Travel accuracy : ≤1%
• Travel speed : 1mm/min ~500mm/min
• Speed accuracy : ≤1%
• Test force range : 0.2% ~ 100%FS
• Force accuracy : ≤1% 

Software configuration (standard)

A version of the test system, with a single-step test

Software configuration (optional)

The C version of the test system can achieve a multi-step test 

Fixture and standards

Version A :

ISO 9073-3,ISO 13934-1,ISO 13934-2,ASTM D5034,

ASTM D5035,GB/T 3923.1, GB/T 3923.2

GB/T13773.1,GB/T13773.2,GB/T 24218.3,

ISO 13937-2(sample with 50mm wide), ISO13937-3,

GB/T 3917.2(sample with 50mm wide), GB/T 3917.5

( The standards above are matched with: clamps by 25x25 mm, 25x50 mm,

25x75 mm)

Optional fixture and standards

Version A : ISO 9073-4,GB/T 3917.3 (clamps by 25x100 mm, ASTM D5587 (clamps by 50x75  mm), ISO 13937-4, ISO 4674-1, GB/T 3917.4  (clamps by 25x200 mm)

Leather tearing fixture : ISO 3377-2

Top breaking fixture : ASTM D6797 FZ/T 01030 GB/T 19976

Yarn fixture : ISO 2062

Version C : ISO 13936-2, ASTM D4964 (U type fixture)

VersionC+ : ASTM D434 ASTM D1683 ISO 13936-1

( The standards above need to be programmed according to the test requirements provided by customers.) ISO 20932-1( with linear clamps, or choose other fixtures and replace the

clamps) 

Computer Configuration of SmartPull

• CPU for the Intel Celeron (Celeron) 2GHz or more CPU
• Memory at least 512MB, more than 1GB is better
• Hard disk space of more than 2GB
• Display resolution of 1024 × 768 or more.
• Printer compatible with the operating system (if output reports are required)
• The applicable operating system for Microsoft’s Windows 
• XP, Windows 7, Windows 8, Windows 10
• If you need to output the report in Word and Excel format,  you should install Microsoft Office 2003, 2007, and 2010 versions of the software.

SmartPull Tensile Tester is AC servodriven and equipped with ball screws to provide stable pulling force and achieve higher testing accuracy.The software of the tester is compatible and powerful by outputting comprehensive test indexes, such as displacement, maximum force, elongation, stress, etc.; and there are various safety designs to protect the instrument and guarantee the operator's safety. It is a tensile machine specially designed for textiles, leather, footwear, etc. It can do tension, compression, bending, tearing, shearing, peeling, and top-breaking tests. It is applicable to many international standards, such as ISO 9073-3, ISO13934-1/2 , ASTM D5034, ASTM D5035, ISO 3377-2, ISO 13937-3 ,FZ/T 01030 , GB/T 19976 and so on.

• Higher testing accuracy

AC servo drive and ball screw achieve stable and constant pulling force, with force accuracy within 1%, ensuring the reliability and repeatability of test results.

• Powerful software

The test software can be applied to different languages and can present the displacement, maximum force, elongation, stress, maximum stress, bending stress, speed, and other test results. That is, getting more comprehensive test indexes.

• Safety guarantee for the whole testing process

Equipped with an intelligent and active displacement and torque alarm system, overload and emergency stop device, and up and down travel limiting device, SmartPull always keeps the testing process safe and stable.

• It can be customized to meet diversified needs.

S-type load cell for pulling force of 5KN-10KN can be customized to realize more testing functions, and the testing software also can be customized to realize automatic repeated testing.

• Lightweight design

The SmartPull is 100 kg lighter than the initial generation, making it easier to handle and operate.