1. Universal Tensile Tester

---

MODEL: RF-UD10K

Product Information

The Universal Tensile Tester is designed to test a wide range of materials for

tension, compression, flexure, shear and peel properties.

1.RF-UD10K

is modern Universal Tensile Tester developed by REFOND. Comparing with other products on the market, it has large improvement in structure and performance. It solves a lot of problems faces by other products in application.

a)Fixtures are embedded with chips containing information about the fixture. System can identify them and prevent mismatch of fixtures during use.

b) Three cameras are installed on the base platform and the crosshead. Two are used to monitor and detect  speci-men slippage at the clamp face. One is used for recording the test.

c) Crosshead can automatically move to different gauge length, no need of manual adjustment.

d) Cameras record the whole test procedure for future reference and reduces arguments.

e) Fixtures are detected and fixture collisions are prevented automaticallyf ) Fixtures are operated by two different air pressure to prevent injury.A lower pressure is used to first hold the specimen. A higher pressure is then used to firmly secure the specimen.

2.Core components such as loadcells, ball screws, and motors use high quality parts to ensure test accuracy and precision.

3.Optional 10N-10kN automatically recognized loadcells fulfill different testing requirements. 

4.Computer controlled instrument. Specialized software provides wide varieties of features.

5.Data measurement and storage are done automatically. Data curves and reports can be exported.

Test Scope :Knitted, Woven, nonwoven, leather, paper, etc.

Test Scope

including woven, layered blankets, napped pile, blanket, and air bag

fabrics.

Testing Standards

ASTM D689B, ASTM D96a, ASTM D1424, ASTM D1922, BS EN ISO

13937, BS EN ISO 4674/2, BS EN ISO 21974, NEXT TM17, TAPPI

T414, DIN 53128, GB/T 3917.1, M&S P29, JIS L1096

Product Information

The Pneumatic Autoburst is so designed to determine the bursting

strength and distension of specimens at it burst point by using

pneumatic inflation method. Testing scope covers: woven, knitted

and non-woven fabrics, papers and carton boards by the application

of pressure load under a rubber diaphragm.

Product Information

Crockmeter determines the color fastness of textiles to dry or wet rubbing. It includes counter, stainless steel clip, test finger (16mm diameter). Electronic crockmeter includes digital electronic pre-settable counter. It motorized for frequent use and long run tests. Max. stroke up to 9999 times.

Test Scope

Used for testing fabric dry and wet rubbing fastness.

Testing Standards

AATCC 8, AATCC 165, ASTM F1319, ISO 105 D02, ISO 105 X12,

JIS L0849, M&S C8, M&S C8A, GB/T 3920, GB/T 5712, NEXT 6,

NEXT 10.

Order Information

RF3172       Manually Crockmeter       

RF3176      Electronic Crockmeter

RF3172/1   Test finger 16mm diameter (Tailor made for other test finger)

RF3172/2   Emery Paper (Pack of 25pcs)

RF3172/3   Crocking Cloths,  50×50mm (Pack of 500pcs)

RF3172/4   Crocking Cloths,  50×50mm (Pack of 500pcs)

RF3172/5   Crocking Cloths,  50×50mm (Pack of 1000pcs)

RF3172/6   Crocking Cloths,  (Pack of 25pcs)

RF3172/7   19mm x 25.4mm Square Rubbing Head

Product Information

Fabric Stiffness Tester used for testing the anti-bending of fabric performance. RF3302 Fabric Stiffness Tester included bending stand, scale

ruler and mirror, etc. It may measure the bending height, flexural rigidity and bending modulus.

Testing Standards

• BS 5058
•  ERT 90-1
• FZ/T 01045
• ISO 9073
• UNI 8279
• GB/T 23329
• AFNOR G07-109

Order Information

RF3305       Fabric Drape Tester (Static Test, for Specimens of Max. 240mm in diameter)

RF3305A    Fabric Drape Tester (Dynamic,Rotatable)

RF3305/1   Specimen Cutting Templates: 240mm

RF3305/2   Specimen Cutting Templates: 300mm

RF3305/3   Specimen Cutting Templates: 360mm

RF3305/4   Precision Camera

RF3305/5   Specimen Clamp Plate: 180mm

Product Information

LaboDry drying machine is designed to meet AATCC home laundering procedures.

1.LaboDry is designed to meet the parameters list in the Table VI of AATCC Laboratory Procedure 1. 

2.The drying machine is controlled by touchscreen, which the following

parameters can be set or selected: 

a)  Dry programs (Normal, Delicate, Permanent Press, No Heat) can

be selected.  

b)  Drying Time. 

c)  Cooling Down Time.    

d)  Target Humidity Function:Drying time is controlled by the target humidity values measured at the exhaust duct position.   

e)  Target Humidity %RH.

3.Calibration function for traceability:

a)  Temperature. 

b)  Relative Humidity.

The LaboDry drying machine is so designed as to meet all the related AATCC testing standards. In addition, one more design is made to control the drying time by the target relative humidity value measured  at the position of the exhaust duct. 

Test Scope

Textile Fabrics

Testing Standards

AATCC TM88B, TM88C, TM124, TM130, TM135, TM143, TM150,

TM179, and TM207, AATCC LP1-Home Laundering: Drying WashingTable

VI, etc.

Consumables

N/A

Order Information

RF6088D  LaboDry Drying Machine